| CALL TOLL-FREE: 866 649-8477 Built For Fabricators by Fabricators |
| BRUCE ADHESIVES |
| Delta Sharpening Center 23-710 |
| Delta Sharpening Center 23-710 |
Includes:
1/5 HP, 120 Volts motor, 5" diameter, 120-grit aluminum oxide dry wheel, 8" diameter,
1000- grit wet wheel, tool rest base, sliding tool holder, water tank, tool rest, eye shield,
wrenches, instruction manual.
1/5 HP, 120 Volts motor, 5" diameter, 120-grit aluminum oxide dry wheel, 8" diameter,
1000- grit wet wheel, tool rest base, sliding tool holder, water tank, tool rest, eye shield,
wrenches, instruction manual.
Powerful 1/5 HP, 120V induction motor for a variety of sharpening jobs.
Cast-iron construction minimizes operating vibration for increased accuracy.
Tool rest base supports the sliding tool holder for steadier, safer sharpening; adjusts for height and tool angle, and
may be mounted to either the wet or dry wheel.
Dry wheel tool rest adjusts to compensate for wheel wear; protective eye shield deflects sparks
Water tank has adjustment knob for regulating water flow.
Wet wheel has front and rear splash guards for retaining water spray during operation.
Base holes for mounting machine to work bench.
On/off rocker switch has clear plastic, water-resistant cover.
Standard-equipped sliding tool holder secures lathe turning tools, carving chisels and plane irons; may be used on
wet or dry wheel.
Cast-iron construction minimizes operating vibration for increased accuracy.
Tool rest base supports the sliding tool holder for steadier, safer sharpening; adjusts for height and tool angle, and
may be mounted to either the wet or dry wheel.
Dry wheel tool rest adjusts to compensate for wheel wear; protective eye shield deflects sparks
Water tank has adjustment knob for regulating water flow.
Wet wheel has front and rear splash guards for retaining water spray during operation.
Base holes for mounting machine to work bench.
On/off rocker switch has clear plastic, water-resistant cover.
Standard-equipped sliding tool holder secures lathe turning tools, carving chisels and plane irons; may be used on
wet or dry wheel.
| Features |
| Specifications |
Motor: 1/5 HP, 120V, 1 Phase, 60 hz
Motor Control: On/Off rocker switch
Wheel Diameter: 5" (127 mm)
8" (203 mm)
Wheel Type: Aluminum Oxide Dry, Wet
Wheel Face: 2" (52 mm), 2-1/2" (64 mm)
Wheel Hole: 1/2" (0.70")
Speeds: 3450 RPM, 400 RPM
Grit: Wet: 1,000G
Dry: 120G
Width: 16" (406 mm)
Length: 21" (533 mm)
Height: 13" (330 mm)
Weight: 42-1/2 lbs (19 kg)
Shipping Weight: 43 lbs
Motor Control: On/Off rocker switch
Wheel Diameter: 5" (127 mm)
8" (203 mm)
Wheel Type: Aluminum Oxide Dry, Wet
Wheel Face: 2" (52 mm), 2-1/2" (64 mm)
Wheel Hole: 1/2" (0.70")
Speeds: 3450 RPM, 400 RPM
Grit: Wet: 1,000G
Dry: 120G
Width: 16" (406 mm)
Length: 21" (533 mm)
Height: 13" (330 mm)
Weight: 42-1/2 lbs (19 kg)
Shipping Weight: 43 lbs
