| CALL TOLL-FREE: 866 649-8477 Built For Fabricators by Fabricators |
| BRUCE ADHESIVES |
| Delta DJ-20 8" Precision Jointer 37-350A |
| Delta DJ-20 8" Precision Jointer 37-350A |
Includes:
1-1/2HP, 120/240 Volt, 60 hz, single-phase motor, model no. 37-355 set of 3 HSS knives,
cutterhead module, cutterhead guard, wrenches, rabbeting ledge, tilting fence, push
blocks and two pulleys, instruction manual, **Runs on sealed, lubricated-for-life ball
bearings.
1-1/2HP, 120/240 Volt, 60 hz, single-phase motor, model no. 37-355 set of 3 HSS knives,
cutterhead module, cutterhead guard, wrenches, rabbeting ledge, tilting fence, push
blocks and two pulleys, instruction manual, **Runs on sealed, lubricated-for-life ball
bearings.
Unique parallelogram support system allows the table to move in the same area as the cutterhead when raised and
lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker and reduces tear
out.
Cast-iron assures less vibration; cabinet stand completely encases motor and pulleys to protect from dust and
shavings.
Specially-designed cast-iron fence is extra long for continued support throughout the cut. Fence is center-mounted
and functions as a rear guard on narrow cuts.
Modular cutterhead provides a consistently clean cut. Jack-screw arrangement allows easy replacement and
adjustment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in
place without production down-time.
Extra-long infeed table provides a full 76-1/2" of work support.
lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker and reduces tear
out.
Cast-iron assures less vibration; cabinet stand completely encases motor and pulleys to protect from dust and
shavings.
Specially-designed cast-iron fence is extra long for continued support throughout the cut. Fence is center-mounted
and functions as a rear guard on narrow cuts.
Modular cutterhead provides a consistently clean cut. Jack-screw arrangement allows easy replacement and
adjustment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in
place without production down-time.
Extra-long infeed table provides a full 76-1/2" of work support.
| Features |
| Specifications |
Motor: 1-1/2 HP, 120/240V (wired 240V), 60 hz, 1 Phase TEFC, 3450 RPM
Cut Capacity - Width: 8" (203 mm)
Cut Capacity - Depth: 5/8" (16 mm)
Rabbeting Capacity: 5/8" (16 mm)
Cutterhead Speed: 5,500 RPM; 16,500 CPM RPM
Number of Knives: 3
Cutterhead Diameter: 3-3/8" (86 mm)
Table Length of front table (Infeed): 42" (1067 mm)
Table Length of Rear Table (Outfeed): 32" (813 mm)
Table Height: 32" (813 mm)
Fence Size: 5" x 35" (127 x 889 mm)
Fence Tilt: 45° in and out
Fence Positive Stops: 90°, 45° in and out
Dust Port Diameter: 4 "
Length: 76-1/2" (1943 mm)
Width: 26" (660 mm)
Height: 32" (813 mm)
Weight: 394 lbs (179 kg) lbs
Shipping Weight: 523 lbs
Cut Capacity - Width: 8" (203 mm)
Cut Capacity - Depth: 5/8" (16 mm)
Rabbeting Capacity: 5/8" (16 mm)
Cutterhead Speed: 5,500 RPM; 16,500 CPM RPM
Number of Knives: 3
Cutterhead Diameter: 3-3/8" (86 mm)
Table Length of front table (Infeed): 42" (1067 mm)
Table Length of Rear Table (Outfeed): 32" (813 mm)
Table Height: 32" (813 mm)
Fence Size: 5" x 35" (127 x 889 mm)
Fence Tilt: 45° in and out
Fence Positive Stops: 90°, 45° in and out
Dust Port Diameter: 4 "
Length: 76-1/2" (1943 mm)
Width: 26" (660 mm)
Height: 32" (813 mm)
Weight: 394 lbs (179 kg) lbs
Shipping Weight: 523 lbs
