| CALL TOLL-FREE: 866 649-8477 Built For Fabricators by Fabricators |
| BRUCE ADHESIVES |
| Delta Heavy-Duty Wood Shaper 43-455 |
| Delta Heavy-Duty Wood Shaper 43-455 |
Includes:
5HP, 3 Phase, tri-voltage (200-230/460) motor with LVC switch, Motor pulley, Poly V-belt
drive, Two 10" cast-iron extension wins, Micro-adjust fence and guard assembly, 1-1/4"
Spindle, Table inserts, Starting pin, 2-speed spindle pulley, Wrenches and instruction
manual.
5HP, 3 Phase, tri-voltage (200-230/460) motor with LVC switch, Motor pulley, Poly V-belt
drive, Two 10" cast-iron extension wins, Micro-adjust fence and guard assembly, 1-1/4"
Spindle, Table inserts, Starting pin, 2-speed spindle pulley, Wrenches and instruction
manual.
The spindle, housing, motor, raising and lowering mechanism are a single self-contained unit, securely assembled
to the underside of the table for absolute 90° spindle-to-table alignment.
The rugged ddrive spindle assembly and permanently lubricated ball bearings are preloaded to prevent distortion at
high speeds which assures accurate, chatter-free shaping.
Massive 40" X 27" table (with standard cast-iron extension wings) provides extra support for shaping large work.
Also, a precision ground face and ribbed under-table-construction prevents warping.
Precision milled 3/8" X 3/4" T-slot, miter slot accomodate miter gage, sliding miter jig and other accessories for
holding workpiece
Conveniently-grouped controls are at the front of the machine within easy reach of the operator from his normal
workig position.
Deep-tapered spindle design alloes for easy changing of accessory spindles from 1/2" to 1 1/4" to permit use of a
wide variety of shaper cutters. Table opening size can be varied, as needed, by removing special table insert rings
Poly V-Drive System transmits more efficient torque to the spindle
to the underside of the table for absolute 90° spindle-to-table alignment.
The rugged ddrive spindle assembly and permanently lubricated ball bearings are preloaded to prevent distortion at
high speeds which assures accurate, chatter-free shaping.
Massive 40" X 27" table (with standard cast-iron extension wings) provides extra support for shaping large work.
Also, a precision ground face and ribbed under-table-construction prevents warping.
Precision milled 3/8" X 3/4" T-slot, miter slot accomodate miter gage, sliding miter jig and other accessories for
holding workpiece
Conveniently-grouped controls are at the front of the machine within easy reach of the operator from his normal
workig position.
Deep-tapered spindle design alloes for easy changing of accessory spindles from 1/2" to 1 1/4" to permit use of a
wide variety of shaper cutters. Table opening size can be varied, as needed, by removing special table insert rings
Poly V-Drive System transmits more efficient torque to the spindle
| Features |
| Specifications |
Motor: 5 HP, 230V, 1 Phase, 60 hz
Spindle Diameter: 1-1/4 "
Capacity: 5-1/4" (133 mm)
Speeds: 7,000 & 10,000 RPM
Table Size: 40" x 27" (1016 x 686 mm)
Table Height: 34" (864 mm)
Fence Size: 16-1/2" x 1-3/8" x 5" (418 x 35 x 127 mm)
Length: 27" (686 mm)
Width: 40" (1016 mm)
Height: 50" (1270 mm)
Weight: 456 lbs (207 kg) lbs
Shipping Weight: 460 lbs
Spindle Diameter: 1-1/4 "
Capacity: 5-1/4" (133 mm)
Speeds: 7,000 & 10,000 RPM
Table Size: 40" x 27" (1016 x 686 mm)
Table Height: 34" (864 mm)
Fence Size: 16-1/2" x 1-3/8" x 5" (418 x 35 x 127 mm)
Length: 27" (686 mm)
Width: 40" (1016 mm)
Height: 50" (1270 mm)
Weight: 456 lbs (207 kg) lbs
Shipping Weight: 460 lbs
