| CALL TOLL-FREE: 866 649-8477 Built For Fabricators by Fabricators |
| BRUCE ADHESIVES |
| Delta Boring Machines |
| Delta Horizontal Boring Machine 32-350 |
Includes:
1 HP, 3450 RPM, 115/230 Volts, Single Phase motor, Adjustable hold-down clamp,
See-thru guard, Cast-iron table, Dovetailed miter gauge, Miter guage, Adjustable stock
stop, Adjustable boring head, Drill bit adapter, Steel cabinet, Foot pedal, Dust chute,
Wrenches, Instruction manual.
1 HP, 3450 RPM, 115/230 Volts, Single Phase motor, Adjustable hold-down clamp,
See-thru guard, Cast-iron table, Dovetailed miter gauge, Miter guage, Adjustable stock
stop, Adjustable boring head, Drill bit adapter, Steel cabinet, Foot pedal, Dust chute,
Wrenches, Instruction manual.
Adjustable hold-down clampand boring head are pneumatically controlled by a foot pedal to keep operator's hands
free.
See-thru guard protects from flying woodchips.
Heavy cast-iron table features dovetailed miter gage slots for keeping miter gage secured when locked in place.
Also with standard-equipped stock stop for operations that require repetitive drilling.
Loosening the nut just below the boring head allows the operator to quickly adjust the depth stop for final drilling
depth.
Guide rails are concealed inside flexible rubber tubing for protection against dust and chips.
Tough cast-iron table is mounted on dovetail ways with an adjustable gib. The four bolts located on the right-hand
side may be adjusted to compensate for wear.
Aluminum Boring Head contains two adjustable spindles.
Easy-to-read scales and reference lines for accurate setting.
Convenient grease fitting accepts standard grease gun for lubricating boring head.
Adjustable feed rate knob controls boring speed at which the drill bits enter the workpiece.
Fabricated steel cabinet has bolt-down feet for operating sability.
free.
See-thru guard protects from flying woodchips.
Heavy cast-iron table features dovetailed miter gage slots for keeping miter gage secured when locked in place.
Also with standard-equipped stock stop for operations that require repetitive drilling.
Loosening the nut just below the boring head allows the operator to quickly adjust the depth stop for final drilling
depth.
Guide rails are concealed inside flexible rubber tubing for protection against dust and chips.
Tough cast-iron table is mounted on dovetail ways with an adjustable gib. The four bolts located on the right-hand
side may be adjusted to compensate for wear.
Aluminum Boring Head contains two adjustable spindles.
Easy-to-read scales and reference lines for accurate setting.
Convenient grease fitting accepts standard grease gun for lubricating boring head.
Adjustable feed rate knob controls boring speed at which the drill bits enter the workpiece.
Fabricated steel cabinet has bolt-down feet for operating sability.
| Features |
| Specifications |
Motor: 1HP, 3450 rpm, 115/230V, 60 hz, 1 Phase
Air Requirement: PSI
Table Size: 15-3/4" x 9-7/8" (400 x 251 mm)
Length: 37-1/2" (953 mm)
Width: 15-3/4" (400 mm)
Height: 48" (1219 mm)
Weight: 303 lbs (138 kg)
Shipping Weight: 310 lbs
Air Requirement: PSI
Table Size: 15-3/4" x 9-7/8" (400 x 251 mm)
Length: 37-1/2" (953 mm)
Width: 15-3/4" (400 mm)
Height: 48" (1219 mm)
Weight: 303 lbs (138 kg)
Shipping Weight: 310 lbs
Includes:
3/4HP, 1725 rpm, single phase motor;, Table and fence assembly, Left and right indexing
pins, Left and right work stops, 13-spindle boring head, See through spindle guard,
Telescoping handle, Table, Adjustable depth stop, Steel support structure and base,,
Wrench and literature holder and instruction manual., Instruction manual, Shown with
Optional Stand: Model 32-331.
3/4HP, 1725 rpm, single phase motor;, Table and fence assembly, Left and right indexing
pins, Left and right work stops, 13-spindle boring head, See through spindle guard,
Telescoping handle, Table, Adjustable depth stop, Steel support structure and base,,
Wrench and literature holder and instruction manual., Instruction manual, Shown with
Optional Stand: Model 32-331.
Large, 16" X 29 3/4" table provides a full 12" of work space in front of the boring head for boring extra-large boards
Fully-adjustable table and fence assembly features easy-to-read English and Metric scales for quick set-up and
accurate boring.
Indexing pins help operator to maintain correct spindle alignment for resuming line boring operations in long
workpieces
Work stops on either end of the fence allow operator to line up work from the left or right for performing parallel
boring patterns.
Adjustable depth stop controls the downward travel of boring head.
Heavy-gage, sheet steel support structure has a sturdy steel base with holes for bench or stand mounting
Powerful 3/4 HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates.
Large-capacity, 13-spindle boring head comes with a see-through spindle guard for safety
Telescoping handle, featured on No.32-325, extends from 16" to 23" for increased leverage when needed; retracts
when not in use.
Fully-adjustable table and fence assembly features easy-to-read English and Metric scales for quick set-up and
accurate boring.
Indexing pins help operator to maintain correct spindle alignment for resuming line boring operations in long
workpieces
Work stops on either end of the fence allow operator to line up work from the left or right for performing parallel
boring patterns.
Adjustable depth stop controls the downward travel of boring head.
Heavy-gage, sheet steel support structure has a sturdy steel base with holes for bench or stand mounting
Powerful 3/4 HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates.
Large-capacity, 13-spindle boring head comes with a see-through spindle guard for safety
Telescoping handle, featured on No.32-325, extends from 16" to 23" for increased leverage when needed; retracts
when not in use.
| Features |
| Specifications |
Motor: 3/4 HP, 120V, 60 hz, 1 Phase
Speed: 1725 rpm
Air Requirement: PSI
Table Size: 16" x 29-3/4" (406 x 756 mm)
Length: 28-1/2" (724 mm)
Width: 30" (762 mm)
Height: 32-1/2" (826 mm)
Weight: 98 lbs (44 kg) lbs
Shipping Weight: 132 lbs
Speed: 1725 rpm
Air Requirement: PSI
Table Size: 16" x 29-3/4" (406 x 756 mm)
Length: 28-1/2" (724 mm)
Width: 30" (762 mm)
Height: 32-1/2" (826 mm)
Weight: 98 lbs (44 kg) lbs
Shipping Weight: 132 lbs
| Delta Horizontal Boring Machine 32-325 |