| CALL TOLL-FREE: 866 649-8477 Built For Fabricators by Fabricators |
| BRUCE ADHESIVES |
| Delta Lathes |
| 46-755X |
16" Steel Bed Lathe
The 46-755X includes basic machine with 2 HP, 230 Volts motor, drive center, live center, 4" face
plate, 12" tool rest and base, knockout bar, wrenches, instruction manual.
plate, 12" tool rest and base, knockout bar, wrenches, instruction manual.
Features
5 YEAR WARRANTY. All X5 series tools are
backed by a "best in class" 5 year
warranty. That is 3-4 years longer than
other brands.
Industry proven high and low
acceleration/deceleration variable
frequency.
Large 12" ductile iron tool rest and base
move easily on ground bed ways for
maximum tool placement and versatility.
Steel bed design is 20 times torsionally
stiffer than typical cast-iron bed designs.
Variable frequency drive controls are
located close to workzone for convenient
operation.
4" hard-wood or steel spacers can be
added to adjust height.
backed by a "best in class" 5 year
warranty. That is 3-4 years longer than
other brands.
Industry proven high and low
acceleration/deceleration variable
frequency.
Large 12" ductile iron tool rest and base
move easily on ground bed ways for
maximum tool placement and versatility.
Steel bed design is 20 times torsionally
stiffer than typical cast-iron bed designs.
Variable frequency drive controls are
located close to workzone for convenient
operation.
4" hard-wood or steel spacers can be
added to adjust height.
Motor: 2 HP, 240V, 60 hz, 3 Phase* (control
converts 1 Phase to 3 Phase)
Motor Control: 240V 50/60 hz, variable frequency, 1
Phase
Speed: 0-2200 and 0-3200
Swing over bed: 16" (406 mm)
Swing Over Base: 11-1/2" (292 mm)
Distance between Centers: 42" (1067 mm)
Drive spindle thread count: 1-1/4" (32 mm) -8 RH
thread
Drive spindle through hole: 9/16" (14 mm)
Head and tailstock taper: #2MT
Tailstock through hole: 11/32" (10 mm)
Tailstock spindle travel: 4" (102 mm)
Tool rest: 12" (305 mm)
Length: 68" (1727 mm)
Width: 20" (508 mm)
Height: 54" (1372 mm)
Weight: 354 lbs (161 kg)
converts 1 Phase to 3 Phase)
Motor Control: 240V 50/60 hz, variable frequency, 1
Phase
Speed: 0-2200 and 0-3200
Swing over bed: 16" (406 mm)
Swing Over Base: 11-1/2" (292 mm)
Distance between Centers: 42" (1067 mm)
Drive spindle thread count: 1-1/4" (32 mm) -8 RH
thread
Drive spindle through hole: 9/16" (14 mm)
Head and tailstock taper: #2MT
Tailstock through hole: 11/32" (10 mm)
Tailstock spindle travel: 4" (102 mm)
Tool rest: 12" (305 mm)
Length: 68" (1727 mm)
Width: 20" (508 mm)
Height: 54" (1372 mm)
Weight: 354 lbs (161 kg)
Specifications
| Quick Links |
| 46-715 |
14" Cast-Iron Lathe
The 46-715 includes 3/4 HP, 60 hz, 9.8 amp motor, 12" cast-iron offset tool rest, 6" face plate,
spur center, 1" - 8 spindle and steel stand, instruction manual.
spur center, 1" - 8 spindle and steel stand, instruction manual.
Features
Powerful 3/4 HP, 60 hz., 9.8 amp, easy
10-position speed change.
Turn head stock 45 degrees, 90 degrees,
and 180 degrees for bowl turning or
general outboard turning.
Easy access on/off switch.
6" face plate, spur center and ball-bearing
live center included.
12" cast-iron offset tool rest.
Tailstock ram travel 3" through 3/4 thread.
Steel stand included.
24-position index scale on pulley for
ornamental work.
10-position speed change.
Turn head stock 45 degrees, 90 degrees,
and 180 degrees for bowl turning or
general outboard turning.
Easy access on/off switch.
6" face plate, spur center and ball-bearing
live center included.
12" cast-iron offset tool rest.
Tailstock ram travel 3" through 3/4 thread.
Steel stand included.
24-position index scale on pulley for
ornamental work.
Specifications
Motor: 3/4 HP, 120V, 1 Phase, 60 hz, 1725 RPM
Motor Control: On/Off Switch
Speed: 600-2200 RPM
Swing over bed: 14" (356 mm)
Swing Over Base: 10-1/8" (257 mm)
Distance between Centers: 40" (1016 mm)
Drive spindle thread count: 1" -8 RH thread
Drive spindle through hole: 7/16" (11 mm)
Head and tailstock taper: #2 Morse
Tailstock through hole: 3/8" (9.5 mm)
Tailstock spindle travel: 3
Tool rest: 12"
Length: 68" (1727 mm)
Width: 20" (508 mm)
Height: 54" (1372 mm)
Weight: 300 lbs (136 kg)
Motor Control: On/Off Switch
Speed: 600-2200 RPM
Swing over bed: 14" (356 mm)
Swing Over Base: 10-1/8" (257 mm)
Distance between Centers: 40" (1016 mm)
Drive spindle thread count: 1" -8 RH thread
Drive spindle through hole: 7/16" (11 mm)
Head and tailstock taper: #2 Morse
Tailstock through hole: 3/8" (9.5 mm)
Tailstock spindle travel: 3
Tool rest: 12"
Length: 68" (1727 mm)
Width: 20" (508 mm)
Height: 54" (1372 mm)
Weight: 300 lbs (136 kg)
| Quick Links |