| CALL TOLL-FREE: 866 649-8477 Built For Fabricators by Fabricators |
| BRUCE ADHESIVES |
| Delta Radial Drill Presses |
| Delta RAM TYPE RADIAL DRILL PRESS 15-127 |
Includes:
6" spindle travel, No. 2 MT spindle, 42" column, 65-863 floor stand, head, jackshaft
assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley,
49-287 V-belt, 49-105 V-belt, motor and controls, instruction manual.
6" spindle travel, No. 2 MT spindle, 42" column, 65-863 floor stand, head, jackshaft
assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley,
49-287 V-belt, 49-105 V-belt, motor and controls, instruction manual.
Machine tool capacity and performance combined with power tool adaptability and versatility.
Extra drilling capacity allows you to take the drill right to the work.
Built in jackshaft assembly provides 16 different speeds from 175 RPM to 8200 RPM.
Head tilts a full 45° right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle.
Big cast iron machined table has four T-Slots and oil trough tapped to accommodate 1/2" pipe.
Column for extra spindle nose to table capacity and a big 6" quill stroke with a ram travel of 17".
Convenient controls for extra operating ease features a quill lock knob, two quill wear adjustment screws and an
adjustable quill return sping.
Extra drilling capacity allows you to take the drill right to the work.
Built in jackshaft assembly provides 16 different speeds from 175 RPM to 8200 RPM.
Head tilts a full 45° right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle.
Big cast iron machined table has four T-Slots and oil trough tapped to accommodate 1/2" pipe.
Column for extra spindle nose to table capacity and a big 6" quill stroke with a ram travel of 17".
Convenient controls for extra operating ease features a quill lock knob, two quill wear adjustment screws and an
adjustable quill return sping.
| Features |
| Specifications |
Motor: 1/2 HP, 115/230V, 1 Phase, 60 hz
Motor Control: Push button station, magnetic starter, transformer and 3-leg overload protection (LVC)
Speeds: With 1725 RPM Motor: 175 - 8200 RPM
Table Tilt: 90°, 45° Left, vertical, 45° Right °
Column Diameter: 3-3/4" (95mm)
Spindle & Chuck Taper: Jacobs 33
Quill Diameter: 1-13/16" (46 mm)
Quill Stroke: 6" (152 mm)
Key Chuck Capacity: 1/2" (13 mm)
Chuck to Table Capacity: 24-3/16" (614 mm)
Height: 86" (2184 mm)
Width: 33" (838 mm)
Length: 58" (1473 mm)
Weight: 778 lbs (353 mm) lbs
Shipping Weight: 800 lbs
Motor Control: Push button station, magnetic starter, transformer and 3-leg overload protection (LVC)
Speeds: With 1725 RPM Motor: 175 - 8200 RPM
Table Tilt: 90°, 45° Left, vertical, 45° Right °
Column Diameter: 3-3/4" (95mm)
Spindle & Chuck Taper: Jacobs 33
Quill Diameter: 1-13/16" (46 mm)
Quill Stroke: 6" (152 mm)
Key Chuck Capacity: 1/2" (13 mm)
Chuck to Table Capacity: 24-3/16" (614 mm)
Height: 86" (2184 mm)
Width: 33" (838 mm)
Length: 58" (1473 mm)
Weight: 778 lbs (353 mm) lbs
Shipping Weight: 800 lbs
| Delta RAM TYPE RADIAL DRILL PRESS 15-126 |
Includes:
6" spindle travel, No. 2 MT spindle, 42" column, 65-863 floor stand, head, jackshaft
assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley,
49-287 V-belt, 49-105 V-belt, motor and controls, instruction manual.
6" spindle travel, No. 2 MT spindle, 42" column, 65-863 floor stand, head, jackshaft
assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley,
49-287 V-belt, 49-105 V-belt, motor and controls, instruction manual.
Machine tool capacity and performance combined with power tool adaptability and versatility.
Extra drilling capacity allows you to take the drill right to the work.
Built in jackshaft assembly provides 16 different speeds from 175 RPM to 8200 RPM.
Head tilts a full 45° right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle.
Big cast iron machined table has four T-Slots and oil trough tapped to accommodate 1/2" pipe.
Column for extra spindle nose to table capacity and a big 6" quill stroke with a ram travel of 17".
Convenient controls for extra operating ease features a quill lock knob, two quill wear adjustment screws and an
adjustable quill return sping.
Extra drilling capacity allows you to take the drill right to the work.
Built in jackshaft assembly provides 16 different speeds from 175 RPM to 8200 RPM.
Head tilts a full 45° right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle.
Big cast iron machined table has four T-Slots and oil trough tapped to accommodate 1/2" pipe.
Column for extra spindle nose to table capacity and a big 6" quill stroke with a ram travel of 17".
Convenient controls for extra operating ease features a quill lock knob, two quill wear adjustment screws and an
adjustable quill return sping.
| Features |
| Specifications |
Motor: 1/2 HP, 230/460V, 3 Phase, 60 hz
Motor Control: Push button station, magnetic starter transformer and overload protection (LVC)
Speeds: 175 - 8200 RPM
Table Tilt: 90°, 45° Left, vertical, 45° Right °
Column Diameter: 3-3/4" (95mm)
Spindle & Chuck Taper: Jacobs 33
Quill Diameter: 1-13/16" (46 mm)
Quill Stroke: 6" (152 mm)
Key Chuck Capacity: 1/2" (13 mm)
Chuck to Table Capacity: 24-3/16" (614 mm)
Height: 86" (2184 mm)
Width: 33" (838 mm)
Length: 58" (1473 mm)
Weight: 778 lbs (353 kg) lbs
Shipping Weight: 800 lbs
Motor Control: Push button station, magnetic starter transformer and overload protection (LVC)
Speeds: 175 - 8200 RPM
Table Tilt: 90°, 45° Left, vertical, 45° Right °
Column Diameter: 3-3/4" (95mm)
Spindle & Chuck Taper: Jacobs 33
Quill Diameter: 1-13/16" (46 mm)
Quill Stroke: 6" (152 mm)
Key Chuck Capacity: 1/2" (13 mm)
Chuck to Table Capacity: 24-3/16" (614 mm)
Height: 86" (2184 mm)
Width: 33" (838 mm)
Length: 58" (1473 mm)
Weight: 778 lbs (353 kg) lbs
Shipping Weight: 800 lbs
