| CALL TOLL-FREE: 866 649-8477 Built For Fabricators by Fabricators |
| BRUCE ADHESIVES |
| Planer HL 850 E |
Includes 1/2" (492143) collet
Dust hood
Adjustment wrench
In cardboard box
Dust hood
Adjustment wrench
In cardboard box
Description: Planer HL 850 E
Item # 574539
| Benefits |
A unique planer, very quiet and very fast. Change cutting depth with the planer running. Always a clear view of the
rebate edge. Create distressed or rough-hewn effects with accessory heads, or convert into a bench-mounted
planer with optional bench unit.
- Planer head is mounted on one side for unlimited rebate depth and planing up to the edge
- Single spiral carbide blade requires no adjustment of cutting circle diameter and planer head
- The fastest blade change - takes only 60 seconds
- Long plate at front and rear
- Lockable planing depth adjuster
- V-groove in shoe for corner beveling
- Pivoted chip deflector and dust extraction port mounts on left or right side
- Electronics with 3 control and monitoring functions: controlled smooth start-up, constant speed under load, and
temperature-triggered overload protection
rebate edge. Create distressed or rough-hewn effects with accessory heads, or convert into a bench-mounted
planer with optional bench unit.
- Planer head is mounted on one side for unlimited rebate depth and planing up to the edge
- Single spiral carbide blade requires no adjustment of cutting circle diameter and planer head
- The fastest blade change - takes only 60 seconds
- Long plate at front and rear
- Lockable planing depth adjuster
- V-groove in shoe for corner beveling
- Pivoted chip deflector and dust extraction port mounts on left or right side
- Electronics with 3 control and monitoring functions: controlled smooth start-up, constant speed under load, and
temperature-triggered overload protection
| Specifications |
Power consumption: 850 Watts / 7 amps 120 v AC
Drive shaft speed: 10000 rpm
Cutting depth: 0 - 9/64" (0 - 3.5 mm)
Rebating depth: unlimited
Head width: 3 15/64" (82 mm)
Noise level at idle: 79 dB(A)
Weight: 8.6 lbs. (3.9 kg)
Drive shaft speed: 10000 rpm
Cutting depth: 0 - 9/64" (0 - 3.5 mm)
Rebating depth: unlimited
Head width: 3 15/64" (82 mm)
Noise level at idle: 79 dB(A)
Weight: 8.6 lbs. (3.9 kg)
| Planer HL 850 E |